Expo AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
2. Fit timing belt "B" over crankshaft sprocket "B" and the counterbalance shaft sprocket. There must be no slack in the belt.
"E" TIMING BELT "B" TENSION ADJUSTMENT
1. Temporarily fix the timing belt "B" tensioner so that the center of the tensioner pulley is to the left and above the center of the installation bolt, and
temporarily attach the tensioner pulley so that the flange is toward the front of the engine.
2. Holding the timing belt "B" tensioner up with your finger in the direction of the arrow, place pressure on the timing belt so that the tension side of
the belt is taut. Now tighten the bolt to fix the tensioner.
CAUTION:
-
Do not let the tensioner pulley shaft rotate with the bolt, otherwise the belt will become too tight.
3. Depress the belt (point A) with a finger to check the tension. If it is not within the standard value, adjust it.
Standard value: 5 - 7 mm (0.20 - 0.28 in.)
"F" CRANKSHAFT SENSING BLADE / FLANGE INSTALLATION
CAUTION:
