Expo AWD L4-2350cc 2.4L SOHC 8 Valve (1992)
Glove Compartment: Technical Service Bulletins
Interior Trim - Glove Box Removal
NO.
TSB-91-52A-004
DATE October, 1991
MODEL1992 Expo
SUBJECT:
GLOVE BOX REMOVAL
This bulletin replaces ATIN # 91-00-002
PURPOSE
This Technical Service Bulletin describes the proper glove box removal procedure. Glove box hinges can be damaged if the glove box is removed
improperly. A glove box damaged from improper handling is not covered by warranty, and the repair expense should not be submitted on a warranty
claim.
GLOVE BOX REMOVAL
1.
If the vehicle has an air duct directly under the glove box, remove the air duct.
2.
From under the dash, remove the two screws securing the glove box hinges to the lower dash support.
