Expo AWD L4-2350cc 2.4L SOHC 8 Valve (1992)
Fig. 25 Identification Of Camshaft Bearing Caps
d. Identify bearing caps 2, 3 and 4 as shown in Fig. 25.
e. Install bearing caps with front marks pointing to camshaft sprocket side of engine.
f.
Bleed auto lash adjuster as outlined under step 1, then insert adjuster into rocker arm securing with lash adjuster holder tool No.
MD998443-01 or equivalent.
g. Install camshaft oil seal using seal installation tool nos. MD998306-01 and MD998307-01 or equivalent.
h. Apply sealant to outer circumference of circular packing then install on cylinder head.