Expo AWD L4-2350cc 2.4L SOHC 8 Valve (1992)
D OIL PUMP DRIVEN GEAR / OIL PUMP DRIVE GEAR INSTALLATION
1. Apply engine oil amply to the gears and line up the alignment marks.
E FLANGE NUT INSTALLATION (ENGINE WITHOUT COUNTERBALANCE SHAFTS)
CAUTION: Before installing the flange nut, apply an appropriate amount of oil to the seating surface.
1. Clamp the oil pump shaft end in a vise
2. Tighten the oil pump sprocket nut to the specified torque.
F
SEALANT APPLICATION TO OIL PRESSURE GAUGE UNIT
1. Coat the threads of the oil pressure gauge unit with sealant and install the unit using the special tool.
Specified sealant: 3M ATD Part No.8660 or equivalent
CAUTION:
1. Keep the end of threaded portion clear of sealant.