Expo AWD L4-2350cc 2.4L SOHC 8 Valve (1992)
2. Apply engine oil to the rear bearing outer circumference and bearing hole in the cylinder block.
3. Using the special tool, install the rear bearing.
NOTE: The left rear bearing has no oil holes.
J
COUNTERBALANCE SHAFT FRONT BEARING INSTALLATION (ENGINE WITH COUNTERBALANCE SHAFTS)
1. Using the special tools, install the front banged.
K FRONT CASE INSTALLATION
1. Set the special tool on the front end of the crankshaft and apply a thin coat of engine oil to the outer circumference of the special tool to install
the front case.
