Expo AWD L4-2350cc 2.4L SOHC 8 Valve (1992)
Standard value: 5 - 7 mm (0.20 - 0.28 in.)
"B" FLANGE INSTALLATION
NOTE: Pay attention to its installation direction.
"C" CRANKSHAFT SPROCKET INSTALLATION
1. Install the crankshaft sprocket.
2. Install the crankshaft pulley.
3. Detent the crankshaft pulley by using the V-ribbed belt and the general service tool.
CAUTION:
-
Do not use the belt installed in the vehicle.
-
Do not use a damaged belt.
4. Tighten the crankshaft sprocket bolt to the specified torque.
5. Remove the crankshaft pulley.
Post-installation Operation
-
Installation of the Under Cover
-
Engine adjustment
