Expo AWD L4-2350cc 2.4L SOHC 8 Valve (1992)
NOTE:
Before connecting fuel hoses and fuel vapor hoses, make sure all hose ends are clean and undamaged.
9.
Connect fuel hoses, fuel vapor hoses, and all other fuel tank components and connections.
10.
Reconnect the battery's negative terminal.
11.
Refuel the vehicle, start the engine, and check for fuel and vapor leaks. If any leaks are found, tighten the suspected fitting and recheck until no
leaks are present.
12.
Install the propeller shaft on the vehicle. Refer to the service manual excerpt on page for installation instructions.
Warranty Information
Position Code:
136010
Utilize standard warranty procedures.
