Expo AWD L4-2350cc 2.4L SOHC 8 Valve (1992)
Starter Solenoid: Testing and Inspection
Magnetic Switch Pull-In Test
Fig. 5 Testing Magnetic Switch
1.
Disconnect field coil wire from ``M'' terminal of magnetic switch, Fig. 5.
2.
Connect a 12 volt battery between ``S'' and ``M'' terminals. This test must be performed in less than 10 seconds to prevent coil from burning
out.
3.
If pinion moves out, then pull-in coil is operating correctly. If pinion does not move out, replace magnetic switch.