Expo LRV AWD L4-1834cc 1.8L SOHC 16 Valve (1992)
Brake Master Cylinder: Service and Repair
1.
Disconnect brake fluid sensor electrical connector from master cylinder reservoir.
2.
Position a drain pan under the master cylinder.
3.
On models with separately mounted reservoir, disconnect reservoir hoses from the master cylinder.
4.
On all models, use a suitable wrench to disconnect brake lines from the master cylinder. Plug all lines and fittings.
5.
Remove master cylinder-to-brake booster attaching nuts.
6.
Pull master cylinder outward and away from brake booster.
7.
Reverse procedure to install noting the following:
a. Prior to master cylinder installation, adjust brake booster pushrod as described under ADJUSTMENT PROCEDURES/BRAKE BOOSTER
PUSHROD.
b. Bleed hydraulic system as described under MAINTENANCE PROCEDURES/HYDRAULIC SYSTEM BLEEDING.
