Expo LRV AWD L4-1834cc 1.8L SOHC 16 Valve (1992)
Technical Service Bulletin # 9155014
Date: 911101
A/C - Install Kit Water Temperature Switch Change
NO.: TSB-91-55-014
DATE:
November, 1991
MODEL:
1992 Expo
SUBJECT:
A/C KIT WATER TEMPERATURE SWITCH
PURPOSE
This bulletin revises the Expo A/C installation manual water temperature switch installation procedure and the A/C electrical schematic to reflect a
production change.
AFFECTED A/C INSTALLATION MANUAL
1992 EXPO AND EXPO LRV (MSSP-047F92), Pages 26, 40
To correct the A/C Installation Manual please make the indicated revisions as shown in this bulletin.
Instructions
The A/C Installation Manual shows two water temperature switches. One of the switches has two pins; the other has one pin. The two-pin switch is used
on all installations. The one-pin switch is used on vehicles which have a "1-P" harness. If the A/C kit you are installing has a 1-pin switch but the vehicle
has no "1-P" wiring connector, discard the 1-pin switch.
A/C kits manufactured before October, 1991 may contain two water temperature switches. When installing A/C kit P/N MB898396 on an Expo 2.4L
with automatic transaxle, please discard the one pin water temperature switch (P/N MZ701096).
1992 Expo and Expo LRV, Page 26
