Expo LRV AWD L4-1834cc 1.8L SOHC 16 Valve (1992)
Idle Speed/Throttle Actuator - Electronic: Description and Operation
IAC Motor Circuit
PURPOSE
The Idle Air Control (IAC) servo maintains idle speed by compensating for loads placed on the engine.
LOCATION
The IAC is located on the throttle chamber.
CONSTRUCTION
The (IAC) servo consists of a motor, worm gear, worm wheel and plunger. A position sensor is used to detect plunger position, and a closed throttle
position switch is used to detect idle position. The worm wheel (attached to the motor shaft) is meshed with the worm gear on the plunger.
OPERATION
As the motor rotates, as determined by the ECU, the plunger extends or retracts. Intake air passes through the plunger opening and idle speed is
controlled bypassing this air around the throttle blade.
The Idle Air Control (IAC) servo adjusts the idle for air conditioning and automatic transmission loads, anti lock braking, and is used as a fast idle for
cold start. The ECU uses the idle speed control (ISC) servo to make idle adjustments.