mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Idle Speed Motor Position Sensor|Description and Operation > < Fuel - System Diagnosis In Tank Filter Clogging|Page 2820
Page 1
background image

Idle Speed Motor Position Sensor: Technical Service Bulletins
Idle Switch Inspection - Service Manual Revision

NO.: TSB-96-13-006

DATE: April, 1996

MODEL: See table 

SUBJECT:  
IDLE SWITCH INSPECTION - SERVICE MANUAL REVISION

TSB Revision TSB-96-13-006

PURPOSE

When diagnosing the idle position switch condition (item 26 in the Scan Tool Data List), the information in the service manual may not be enough to
make an accurate diagnosis. This bulletin adds a note to the chart that provides more information to allow the technician to make an informed decision.

AFFECTED SERVICE MANUALS

Service Manual

Page

1992-96 3000GT, Vol. 1

13A-101

1995 Eclipse, Vol. 1

13A-197

1992-95 Expo, Vol. 1

13A-82

1989-93 Galant, Vol. 1

13-62

199-95 Galant, Vol. 1

13A-82

1992-95 Montero, Vol. 1

13A-69

The note is included in the following manuals, Vol. 1:

^

1992-96 Diamante

^

1996 Eclipse

^

1996 Galant

^

1993-96 Mirage

^

1996 Montero

SERVICE MANUAL REVISION

Please add a note to the chart on each affected page to refer to this Technical Service Bulletin as illustrated, and write the TSB number in the box at the
bottom of the page.

ADDED NOTE

The following note will help to determine when the idle switch condition is normal:

"The idle switch is considered normal if it turns off when TPS voltage rises 50-100 mV above the idle value. If the throttle must be opened wider;
i.e., if it takes more than a 100-mV rise to turn off the idle switch, then adjust the idle switch and TPS."

Idle Speed Motor Position Sensor|Description and Operation > < Fuel - System Diagnosis In Tank Filter Clogging|Page 2820