mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Customer Safety Information|Page 4325 > < Customer Safety Information|Page 4323
Page 1
background image

SRS Control Unit: Technician Safety Information

SERVICE PRECAUTIONS 

1. In order to avoid injury to yourself or others from accidental deployment of the air bag during SRS servicing, read and carefully follow all the

precautions and procedures described in this manual.

2. Do not use any electrical test equipment on or near SRS components, except those specified on next page.

Never use an analog ohmmeter.

3. Never Attempt to Repair the Following components: 

-

SRS Air Bag Control Unit (SRS-ECU)

-

Clock Spring

-

Air Bag Module

If any of those components are diagnosed as faulty, they should only be replaced, in accordance with the COMPONENT SERVICE procedures in
this manual.

4. Do not attempt to repair the wiring harness connectors of the SRS. If any of the connectors is diagnosed as faulty, replace the wiring harness. If the

wires are diagnosed as faulty, replace or repair the wiring harness according to the table above.

Components: 

Customer Safety Information|Page 4325 > < Customer Safety Information|Page 4323