Expo LRV AWD L4-1834cc 1.8L SOHC 16 Valve (1992)
Throttle Valve Cable/Linkage: Adjustments
Fig. 5 Throttle Control Cable Adjustment
1.
Place throttle lever in curb idle position.
2.
Raise throttle cable cover (B) upward, then loosen cable lower mounting bracket bolt, Fig. 5.
3.
Move cable lower mounting bracket until clearance between nipple and top of cable cover (A) is .02-.06 inch, then torque cable lower mounting
bracket bolt to 9 to 10.5 lb-ft.
4.
With throttle lever in wide open position, pull throttle cable upward to ensure cable has freedom of movement.