mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Acceleration/Deceleration Sensor > < ABS Main Relay|Locations|Page 3588
Page 1
background image

ABS Main Relay: Service and Repair

    On models equipped with airbag, disarm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.

1.

Remove ECU electrical connector mounting screws, then the ECU.

2.

Remove the A.B.S. power relay, located under the left-hand side of the instrument panel.

3.

Reverse procedure to install.

Acceleration/Deceleration Sensor > < ABS Main Relay|Locations|Page 3588