Expo LRV AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
-
Pay special attention to the direction of the crankshaft sensing blade or flange, otherwise the timing belt will be damaged.
"G" CRANKSHAFT SPROCKET INSTALLATION
CAUTION:
-
Pay special attention to the direction of the flange, otherwise the timing belt will be damaged.
"H" AUTO TENSIONER INSTALLATION
1. If the auto tensioner rod is in its fully extended position, reset it as follows.
(1) Keep the auto tensioner level and clamp it in the vise with soft jaws. If the plug at the bottom of the auto tensioner protrudes, surround it with a
plain washer as illustrated to prevent the plug from touching the vise (auto tensioner with plug).
(2) Push in the rod little by little with the vise until the set hole A in the rod is aligned with that B in the cylinder.
(3) Insert a wire 1.4 mm (0.055 in.) in diameter, into the set holes.
(4) Unclamp the auto tensioner from the vise.
