Expo LRV AWD L4-2350cc 2.4L SOHC 16 Valve (1993)
(1) Screw in the tool until it contacts the tensioner arm.
(2) From that point of contact, further screw in the tool, screwing it in until the push rod of the auto tensioner body moves backward and the
tensioner arm contacts the auto tensioner body.
NOTE: Check that the amount that the tool has been screwed in (when the push rod moves backward) is within the standard value.
Standard value: 2.5 - 3 turns
8. Install the rubber plug to the timing belt rear cover.
"L" TIMING BELT LOWER / UPPER COVER INSTALLATION
