mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Crankshaft Position / Camshaft (TDC) Sensor|Page 3054 > < Crankshaft Position / Camshaft (TDC) Sensor
Page 2
background image

Distributor Exploded View

DISASSEMBLY:

6.  Lightly clamp the distributor in a vise equipped with soft jaws.

7.  Pull off the rotor from the rotor shaft.
8.  Remove the packing rubber.
9.  Lift off the cover.

Rotor Shaft Retaining Screw Location Add

10.  Remove the rotor shaft by using a screw driver.
11.  Remove the disc and spacer. Observe which side of the disc is the top, for future reassembly.
12.  Disconnect the lead wire connector.

13.  Lift off the plate and module by removing the mounting screws.

Crankshaft Position / Camshaft (TDC) Sensor|Page 3054 > < Crankshaft Position / Camshaft (TDC) Sensor