mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Control Arm|Front|Page 4042 > < Ball Joint|Service and Repair
Page 1
background image

Control Arm: Service and Repair
Front

Fig. 7  Lower Control Arm & Ball Joint Replacement

Replace lower control arm and ball joint in numbered sequence shown in Fig. 7. Disconnect knuckle from lower arm ball joint using steering linkage
puller MB991113-01, or equivalent. Loosen but do not remove ball joint nut until lower control arm is ready to be removed.

Control Arm|Front|Page 4042 > < Ball Joint|Service and Repair