mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Automatic Transaxle - Improved Rear Clutch|Page 3261 > < Band Apply Servo Switch, A/T|Description and Operation|Page 3256
Page 1
background image

Clutch: Technical Service Bulletins
Automatic Transaxle - Improved Rear Clutch

NO: TSB-97-23-009
DATE: July, 1997
MODEL: See Below

SUBJECT:
AUTOMATIC TRANSAXLE REAR CLUTCH IMPROVEMENTS

PURPOSE
This bulletin contains information about improved automatic transaxle rear clutch parts introduced for the 3-speed (3A/T) and 4-speed (4A/T) automatic
transaxles. These new parts have added durability allowing the clutch disks to last longer.

BACKGROUND INFORMATION
The clutch face material has been changed on the rear clutch disks for added durability for the 3-speed automatic transaxles and all listed 4-speed
automatic transaxles. Also, for the 3A/T, the inner accumulator spring constant value is changed.

AFFECTED VEHICLES

All vehicles equipped with the automatic transaxles as shown.

PRODUCTION INFORMATION

^

3 A/T
Clutch disk face material and a new accumulator spring were introduced into production on all 3-speed automatic transaxles beginning August
21,1996.

^

4 A/T
Clutch disk face material was changed during production of the affected 4-speed automatic transaxles according to the following schedule:

F4A21/22/23: Beginning December 11,1996
W4A32: Beginning December 13, 1996
W4A33: Beginning December 12, 1996

PARTS INFORMATION

3 A/T - F3A21
The illustrated parts are improved.  Use only the new part numbers when replacing the rear clutch assembly, disk assembly, and/or inner accumulator
spring.

Automatic Transaxle - Improved Rear Clutch|Page 3261 > < Band Apply Servo Switch, A/T|Description and Operation|Page 3256