FE120 L4-4.9L DSL Turbo (2005)
#157 Inspection of idling speed adjustment potentiometer
-
Apply 5 V DC to terminals 1 and 2 of the idling speed adjustment potentiometer.
-
Turn the knob fully counterclockwise. Then, measure the output voltage across terminals 2 and 3 (see the diagrams) while slowly turning the knob
clockwise.
-
If any measurement is out of specification, replace the idling speed adjustment potentiometer.
#163 Inspection of torque limit switch
-
If there is any abnormality, replace the switch.