mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fuel Filter > < Air Filter Element|Specifications|Page 224
Page 3
background image

[13] Air cleaner element

[Cleaning]

-

Blow compressed air of 685 kPa{100 lbf/in2, 7 kgf/cm2} or less through air cleaner element 13 from the inside.

-

When using compressed air, move the blower's nozzle up and down along the pleats of air cleaner element 13 evenly.

CAUTION:
-

Do not tap or hit air cleaner element 13 to remove dust.

-

Do not blow compressed air through air cleaner element 13 from the outside.

[Inspection]

-

Illuminate the inside of air cleaner element 13.

-

If parts of the filter paper are torn or thin, or if the packing of the upper surface of air cleaner element 13 is damaged, replace the air cleaner
element.

NOTE:  If the dust on air cleaner element 13 is wet due to oil smoke or soot, replace the air cleaner regardless of the scheduled replacement interval.

Fuel Filter > < Air Filter Element|Specifications|Page 224