Galant L4-1997cc 2.0L SOHC 16 Valve (1993)
Fuel Pressure Release: Service and Repair
1. Disconnect fuel pump harness connector at the fuel tank rear side. Cover fuel pipe line with rag after relieving pressure as certain pressure
may still remain.
2. Start engine and let idle until engine stops by itself, then turn ignition switch to Off. Failure to relieve fuel system pressure prior to
disconnecting fuel system components may cause fire or personal injury.
3. Disconnect negative battery ground cable.
4. Connect fuel pump harness connector.
5. After repairs have been completed, connect positive battery terminal to fuel pump drive terminal and the negative terminal to the chassis. Ensure
fuel pump operates at this time.
