Galant L4-1997cc 2.0L SOHC 16 Valve (1993)
(1) Remove the multiport fuel injection relay.
(2) Check the continuity between the multiport fuel injection relay terminals.
(3) Use jumper leads to connect multiport fuel injection relay terminal 7 to the battery (+) terminal and terminal 5 to the battery (-) terminal.
Caution: When connecting the jumper leads, be careful not to mistake the connection terminals, as damage to the relay will result.
(4) Check the Voltage at multiport fuel injection relay terminal 1 while connecting and disconnecting the jumper lead at the battery (-) terminal.
(5) Use the jumper leads to connect multiport fuel injection relay terminal 8 to the battery (+) terminal and terminal 6 to the battery (-) terminal.
(6) Check the continuity between multiport fuel injection relay terminals 2-4 and terminals 3-4 while connecting and disconnecting the jumper lead at
the battery (-) terminal.
(7) If there is a defect, replace the multi port fuel injection relay.
Engine Control Module Power and Ground
