mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Power Steering Pressure Switch > < Diagram Information and Instructions|Page 3249
Page 1
background image

Oxygen Sensor: Service and Repair

Oxygen (O2) Sensor Location

REMOVAL 

1. Disconnect the harness terminal.
2. Remove the sensor with a suitable socket or wrench.

  Oxygen Sensor

INSTALLATION 

1. Apply a thin coating of anti-seize compound to the threads.

NOTE:  Do not contaminate the sensor tip with compound.

2. Install the sensor and torque to 29 - 36 ft lb
3. Apply a thin coating of dielectric compound to the connector.
4. Connect harness terminal.

Power Steering Pressure Switch > < Diagram Information and Instructions|Page 3249