mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fuel Tank Unit > < Fuel Tank Vacuum Relief Valve (Fuel Cap)
Page 1
background image

Fuel Tank Pressure Release Valve: Testing and Inspection
Overfill Limiter (Two-Way Valve)

Overfill Limiter (Two-way Valve) Operation

1. Remove the overfill limiter mounting bolt.
2. Disconnect the vapor hoses, and then remove the over fill limiter.
3. Blow lightly into the inlet and the outlet. If air passes through after a slight resistance, then the valve is good.

Fuel Tank Unit > < Fuel Tank Vacuum Relief Valve (Fuel Cap)