Galant L4-1997cc 2.0L SOHC 16 Valve (1993)
Throttle Cable/Linkage: Adjustments
Without Cruise Control
Accelerator Cable Adjustment
1. Turn the ignition on (without starting the engine) for approximately 15 seconds minimum.
2. Loosen the adjusting bolts.
3. Adjust the accelerator cable free play.
Clearance:
0.04 - 0.08 in. (1 - 2 mm)
4. Tighten the adjusting bolts.
5. Confirm that the throttle valve fully opens and closes by operating the accelerator pedal.
Accelerator Cable, Throttle Body End
6. Confirm that the throttle lever stopper touches the idle position switch.
