Galant L4-1997cc 2.0L SOHC 16 Valve (1993)
Alignment: Service and Repair
Front Wheel Alignment
Camber
Camber on these vehicles is preset to specifications and cannot be adjusted. If camber is out of specification, bent or damaged components must be
replaced.
Caster
Caster is preset to specifications and cannot be adjusted. If caster is out of specification, bent or damaged components must be replaced.
Toe-In
Fig. 1 Front Toe-In Adjustment
1. Adjust toe-in by undoing clips and turning left and right tie rod turnbuckles by same amount in opposite directions, Fig. 1.
2. To increase toe-out, turn left turnbuckle toward front of vehicle and right turnbuckle toward rear of vehicle. To increase toe-in, turn turnbuckles in
other direction. Toe-in is adjusted 0.24 inch for each half turn of left and right tie rods.
3. After adjusting toe-in, check that steering wheel turning angle is within specification.