Galant L4-1997cc 2.0L SOHC 16 Valve (1993)
Fig. 13 Replacing Torsion Axle & Arm Assembly (Models W/Disc Brakes)
Fig. 23 Installing Lateral Rod Bolt
1.
Raise and support vehicle.
2.
Remove torsion axle and arm assembly in numbered sequence shown in Figs. 12 and 13, noting the following:
a. Raise up torsion axle and arm assembly. Insert a wooden block between the jack and axle beam, do not allow jack to contact lateral rod.
b. Remove shock absorber mounting bolts and trailing arm mounting bolts.
