Galant L4-2.0L SOHC (1989)
auto-lash adjuster is not allowed to fall.
8.
Remove semicircular packing, then the oil seal.
9.
Remove rocker arm and shaft assembly, then the auto-lash adjuster.
10.
Remove camshaft.
INSPECTION
Fig. 7 Rocker Arm Inspection
1.
Check rocker arm in the positions indicated in Fig. 7.
2.
Check to ensure oil holes are clear.
3.
Check rocker arm shaft at rocker arm mounting positions for wear.
4.
Check rocker arm shaft oil holes to ensure holes are clear.
5.
Check camshaft for wear or damage and replace as necessary.
INSTALLATION
Fig. 8 Rocker Arm & Shaft Installation
1.
Reverse disassembly procedure to assemble and note the following:
a. Assemble rocker arms to rocker shafts, then install on cylinder head, Fig. 8.
b. Apply engine oil to inside diameter of rocker before assembly.
c. Ensure oil hole side is down when installing rocker arm shafts into front camshaft bearing cap.
d. When valve cover is installed, use suitable gasket sealant.
