Galant L4-2.0L SOHC (1989)
(1) Jack up the vehicle after placing a wooden block between the jack and the engine oil pan.
CAUTION: Jack up the vehicle carefully so as not to apply an excessive load to the various parts.
(2) Remove the engine mount bracket.
20. REMOVAL OF TIMING BELT
(1) Turn the crankshaft clockwise and align the timing marks.
CAUTION: The crankshaft must always be turned clockwise.
(2) Make a mark on the back of the timing belt indicating the direction of rotation, so it may be reassembled in the same direction, if it is to be
reused.
(3) Loosen the timing belt tensioner.
