Galant L4-2.0L SOHC (1989)
Control Assembly: All Technical Service Bulletins
A/C - Replacement of Mode Control Cable
SUBJECT:
MODE CONTROL CABLE REPLACEMENT
NO.
TSB-90-55-003
DATE
September, 1990
MODEL
1989 Galant
PURPOSE
A service replacement air mode control cable is required when replacing a control assembly or an air mode control cable in 1989 Galant vehicles. The
new mode control cable with a brown colored sheath has a larger diameter inner wire that is stronger/stiffer than the earlier, black sheathed cable.
PART INFORMATION
Mode Control Cable:
MB813430
Sheath color:
Brown.
NEW CONTROL ASSEMBLY CABLE REPLACEMENT
Figure 1
Figure 2
When replacing a control assembly (Figure 1) on a 1989 Galant, make sure the mode control cable in the new assembly has a brown sheath. If it does
not, replace the mode control cable with a brown one. The easiest way to determine which cable is the mode control cable is to turn the mode control
knob back and forth and observe which cable moves (Figure 2).
CABLE REPLACEMENT
Follow the cable replacement instructions in the 1989-1991 Galant Service Manual beginning on Page 55-25.
