Galant L4-2.0L SOHC (1989)
Alignment: Service and Repair
Front Toe-In
1.
Adjust toe-in by undoing clips and turning left and right tie rod turnbuckles by same amount in opposite directions.
2.
To increase toe-out, turn left turnbuckle toward front of vehicle and right turnbuckle toward rear of vehicle. To increase toe-in, turn turnbuckles in
other direction. Toe-in is adjusted .24 inch for each half turn of left and right tie rods.
3.
After adjusting toe-in, check that steering wheel turning angle is within specifications.
