Galant L4-2.0L SOHC (1989)
4.
First, adjust accelerator cable B in and out movement (throttle valve side), using the adjustment bolts.
Clearance:
0.04 - 0.08 in.
(1 - 2 mm)
5.
Tighten the adjusting bolts.
Cable "A" Adjustment Point
6.
Next, adjust accelerator cable A in and out movement (accelerator pedal side) using the adjustment nut. With the intermediate link A of the
actuator held against the stopper, turn the adjusting nut to remove slack. At the point that the cable becomes tight, back off the nut approx. two
turns and secure with the lock nut
7.
After adjustment recheck to ensure that the engine side cable has the specified clearance.
8.
Confirm that the throttle valve fully opens and closes by operating the accelerator pedal.
Accelerator Cable, Throttle Body End
9.
Confirm that the throttle lever stopper touches the idle position switch.
10.
Replace the cruise control actuator cover.
