Galant L4-2.0L SOHC (1989)
-
Check the outer surface of the input shaft where the needle bearing is mounted for damage, abnormal wear and seizure [portion A]
-
Check the splines for damage and wear.
NEEDLE BEARING
-
Combine the needle bearing with the shaft or bearing sleeve and gear and check that it rotates smoothly without abnormal noise or play.
-
Check the needle bearing cage for deformation.
SYNCHRONIZER RING
-
Check the clutch gear teeth for damage and breakage.
-
Check the internal surface for damage, wear and broken threads.
-
Force the synchronizer ring toward the clutch gear and check clearance "A". Replace if it is out of specification
Limit: 0.5 mm (0.02 in.)
