Galant L4-2.0L SOHC (1989)
SYNCHRONIZER SLEEVE AND HUB
-
Combine the synchronizer sleeve and hub and check that they slide smoothly.
-
Check that the sleeve is free from damage at its inside front and rear ends.
-
Check for wear of the hub end surfaces (in contact with each speed gear).
CAUTION: When replacing, replace the synchronizer hub and sleeve as a set.
SYNCHRONIZER KEY AND SPRING
-
Check for wear of the synchronizer key center protrusion.
-
Check the spring for deterioration, deformation and breakage.
SPEED GEARS
-
Check the bevel gear and clutch gear teeth for damage and wear.
-
Check the synchronizer cone for rough surface, damage and wear.
-
Check the gear bore and front and rear ends for damage and wear.
SERVICE POINTS OF REASSEMBLY
15. INSTALLATION OF SYNCHRONIZER SPRING
