Galant L4-2.0L SOHC (1989)
Seals and Gaskets: Service and Repair
1. Disconnect the drive shaft from the transaxle. See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair
2. Using a flat-tip (-) screwdriver, remove the oil seal.
3. Using the special tool, tap the drive shaft oil seal into the transaxle.
4. Apply a coating of the transaxle oil to the lip of the oil seal.
Transaxle oil: Hypoid gear oil, SAE 75W-85W conforming to API GL-4 or higher
