Galant L4-2.0L SOHC (1989)
Speedometer Gear, M/T: Procedures
1. Correctly insert the adapter into the instrument panel, and fasten the new speedometer cable.
2. Install the grommet so that, as shown in the illustration, the cable attachment part and the projecting part are horizontal.
CAUTION: The cable arrangement should be made so that the radius of cable bends is 150 mm (5.9 in.) or more.
3. At the transaxle end of the speedometer cable, the key joint should be inserted into the transaxle, and the nut should be securely tightened.
CAUTION: If the cable is not correctly and securely connected, it may cause incorrect indication by the speedometer, or abnormal noise. Be sure
to connect it correctly.