Galant L4-2.4L (4G69) (2004)
NO: Repair the wiring harness. The remote controlled radio switch should work normally.
STEP 4. Measure the resistance at remote controlled radio switch ground circuit to the clock spring connector C-306.
1. Disconnect the clock spring connector C-306.
2. Measure resistance between terminal 3 and ground.
-
The measured value should be 2 Ohms or less.
Q: Is the measured resistance 2 Ohms or less?
YES: Go to Step 7.
NO: Go to Step 5.
STEP 5. Check radio, CD player and CD changer connector C-117 and clock spring connector C-306 for loose, corroded or damaged terminals,