mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Diagnostic Strategies|Page 5989 > < Diagnostic Strategies|Page 5987
Page 30
background image

STEP 10. Check the wiring harness between front door speaker (LH) connector E-10 (terminals 1 and 2) and radio and CD player connector
C-111 (terminals 5 and 13).

NOTE:  Also check intermediate connector C-26 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector C-26 is damaged, repair or replace the connector as described in Harness Connector Inspection.

Q: Is the wiring harness between front door speaker (LH) connector E-10 (terminals 1 and 2) and radio and CD player connector C-111 (terminals 5 and
13) in good condition?

YES: The procedure is complete.

NO: Repair the wiring harness. The front door speaker (LH) should sound.

STEP 11. Check the front door speaker (RH).

1. Remove the front door speaker (RH). Refer to Speaker/Removal and Installation.

Diagnostic Strategies|Page 5989 > < Diagnostic Strategies|Page 5987