mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Diagnostic Strategies|Page 6000 > < Diagnostic Strategies|Page 5998
Page 41
background image

STEP 8. Check the front door speaker (LH).

1. Remove the front door speaker (LH).
2. Check that the front door speaker (LH) generates noise when a five-volt voltage is applied on the front door speaker (LH) terminal.

Q: Is the front door speaker (LH) generating noise?

YES: Go to Step 9.

NO: Replace the front door speaker (LH). The front door speaker (LH) should sound.

STEP 9. Check front door speaker (LH) connector E-10 and audio amplifier connector C-113 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.

Q: Are harness connectors E-10 and C-113 in good condition?

YES: Go to Step 10.

NO: Repair or replace the component(s). Refer to Harness Connector Inspection. The front door speaker (LH) should sound.

Diagnostic Strategies|Page 6000 > < Diagnostic Strategies|Page 5998