Galant L4-2.4L (4G69) (2004)
/Page-1365012.png)
2. Measure the resistance between clock spring connector C-306 (clock spring side) terminals 2 and 3. Operate the right and left remote controlled
radio switches, and check that the table given is satisfied.
NOTE: When checking the right remote controlled radio switch, do not operate the left remote controlled radio switch.
Q: Is the resistance between terminals 2 and 3 normal?
YES: This malfunction is intermittent. Refer to How to Use Troubleshooting/Inspection Service Points-How to Cope with Intermittent Malfunction.
NO: Go to Step 8.
STEP 8. Measure the resistance at clock spring terminal.
1. Remove the clock spring (Refer to Air Bag Module(s) and Clock Spring).
