mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 6215 > < Symptom Related Diagnostic Procedures|Page 6213
Page 32
background image

2. Check that the front door speaker (RH) generates noise when a five-volt voltage is applied on the front door speaker (RH) terminal.

Q: Is the front door speaker (RH) generating noise?

YES: Go to Step 12.

NO: Replace the front door speaker (RH). The front door speaker (RH) should sound. 

STEP 12. Check front door speaker (RH) connector E-02 and radio and CD player connector C-111 for loose, corroded or damaged terminals,
or terminals pushed back in the connector.

Q: Are harness connectors E-02 and C-111 in good condition?

YES: Go to Step 13.

NO: Repair or replace the component(s). Refer to Harness Connector Inspection. The front door speaker (RH) should sound.

Symptom Related Diagnostic Procedures|Page 6215 > < Symptom Related Diagnostic Procedures|Page 6213