mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 6235 > < Symptom Related Diagnostic Procedures|Page 6233
Page 52
background image

and other types of similar electrical phenomena.

STEP 1. Check if the customer heard the noise under any of the following conditions.

-

A motorcycle was passing.

-

Lighting was flashing.

-

Passed beneath a power line.

-

Passed beneath a telephone line.

-

Passed by a signal generator.

-

Passed by any other sources of electrical noise.

-

Passed under a bridge or through a tunnel.

Q: Did the noise occur during any of the circumstances listed above?

YES: The observed noise is normal.

NO: Go to Step 2.

STEP 2. Compare the customers radio to another identical model.
Operate the radio in a vehicle with a known good audio system of the same type as the customer's.

Q: Is there more noise on the customers radio?

YES: Check all power and ground connections. If all connections are in good condition, consult the radio manufacturers service center.

NO: The observed noise is normal.

Inspection Procedure 13

Noise is Detected with Engine Running.

Symptom Related Diagnostic Procedures|Page 6235 > < Symptom Related Diagnostic Procedures|Page 6233