Galant L4-2.4L (4G69) (2004)
/Page-1393010.png)
9. Check that all fasteners on the back side of the door trim panel are snug (see photo 9 above).
CAUTION
Take care not to overtighten fasteners as they are screwed into plastic bosses.
10. Ensure the wiring harness retaining clip is properly seated to the door and the vapor barrier is evenly attached along its outer edge (see photo 10
above).
11. Reinstall the door trim panel to the vehicle.
NOTE:
The beltline molding must be attached to the door trim panel prior to installation. Insure that all 7 teal colored retaining clips are undamaged and in place
on the door panel. If lost or broken, replace with p/n MU000637.
PARTS INFORMATION
Use felt insulating material as needed. The correct material can be obtained from MMNA BSR kit, part number MB991752.
WARRANTY INFORMATION
Technical Service Bulletin # 04-52A-004
Date: 041201
Body/Interior - Difficulty Opening Front Doors
No: TSB-04-52A-004
DATE: December, 2004
