mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2534 > < Initial Inspection and Diagnostic Overview|Page 2532
Page 99
background image

NO : Replace the rear door lock actuator (LH). Verify that all the doors can be locked and unlocked normally.

STEP 13. Check ETACS-ECU connector C-219 for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q : Is ETACS-ECU connector C-219 in good condition?

YES : Go to Step 14.

NO : Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that all the doors can be locked and unlocked
normally.

Initial Inspection and Diagnostic Overview|Page 2534 > < Initial Inspection and Diagnostic Overview|Page 2532