Galant L4-2.4L (4G69) (2004)
/Page-650145.png)
Q : Is the wiring harness between power window main switch connector E-12 (terminals 1 and 2) and rear power window sub switch (LH) connector
E-17 (terminals 8 and 5) in good condition?
YES : Replace the power window main switch. When the rear power window sub switch (LH) is operated, the rear power window (LH) should raise
and lower normally.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. When the rear power window sub switch (LH) is operated, the rear power window (LH) should
raise and lower normally.
STEP 22. Check the wiring harness between rear power window sub switch (LH) connector E-17 (terminals 4 and 7) and rear power window
regulator motor (LH) connector E-16 (terminals 1 and 2).
Q : Is the wiring harness between rear power window sub switch (LH) connector E-17 (terminals 4 and 7) and rear power window regulator motor (LH)
connector E-16 (terminals 1 and 2) in good condition?
YES : Replace the power window main switch. When the rear power window sub switch (LH) is operated, the rear power window (LH) should raise
and lower normally.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. When the rear power window sub switch (LH) is operated, the rear power window (LH) should
raise and lower normally.
STEP 23. Check rear power window sub switch (RH) connector E-06 and rear power window regulator motor (RH) connector E-07 for loose,
corroded or damaged terminals, or terminals pushed back in the connector.
Q : Are rear power window sub switch (RH) connector E-06 and rear power window regulator motor (RH) connector E-07 in good condition?
YES : Go to Step 24.
NO : Repair or replace the damaged component(s). Refer to Harness Connector Inspection. When the rear power window sub switch (RH) is
operated, the rear power window (RH) should raise and lower normally.
