mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2588 > < Initial Inspection and Diagnostic Overview|Page 2586
Page 153
background image

CIRCUIT OPERATION

A receiver is incorporated in the ETACS-ECU. This receiver receives a lock or unlock signal from the transmitter.

TROUBLESHOOTING HINTS

-

The RKE transmitter may be defective

-

The ETACS-ECU may be defective

DIAGNOSIS

Required Special Tools:

-

MB991223: Harness Set

-

MB991958: Scan Tool (MUT-III Sub Assembly)
-

MB991824: Vehicle Communication Interface (V.C.I.)

-

MB991827: MUT-III USB Cable

-

MB991910: MUT-III Main Harness A

STEP 1. Verify the central door locking system.

Q : Does the central door locking system work normally?

YES : Go to Step 2.

NO : Refer to Inspection Procedure C-1 "The central door locking system does not work at all."

Initial Inspection and Diagnostic Overview|Page 2588 > < Initial Inspection and Diagnostic Overview|Page 2586