Galant L4-2.4L (4G69) (2004)
CIRCUIT OPERATION
When the lighting switch is set to "TAIL" position, the "TAIL" signal is sent through the column-ECU (incorporated in the column switch) to the
front-ECU. If the front-ECU receives the "TAIL" signal through the column-ECU, the front-ECU turns on the taillight relay (incorporated in the
front-ECU), thus causing the taillights to illuminate.
TECHNICAL DESCRIPTION (COMMENT)
If the taillights do not illuminate normally, the column switch or the front-ECU may be defective.
TROUBLESHOOTING HINTS
-
Trouble in input signal system
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
-
The front-ECU may be defective
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set
-
MB991958: Scan Tool (MUT-III Sub Assembly)
-
MB991824: Vehicle Communication Interface (V.C.I.)