Galant L4-2.4L (4G69) (2004)
STEP 3. Check ETACS-ECU connector C-219, junction block connectors C-214 and C-204 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q : Are ETACS-ECU connector C-219, junction block connectors C-214 and C-204 in good condition?
YES : Replace the ETACS-ECU. Verify that the turn-signal lights illuminate normally.
NO : Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the turn-signal lights illuminate normally.
STEP 4. Check ETACS-ECU connector C-219 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q : Is ETACS-ECU connector C-219 in good condition?
YES : Go to Step 5.
NO : Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the turn-signal lights illuminate normally.